Page 5 of 5 « First 34 5
Reply
Thread Tools
Mordae is offline Mordae
2011-03-22 , 12:45
Posts: 2 | Thanked: 1 time | Joined on Mar 2011
#41
OK, rising the golden pins under the SIM did the trick for me. I put a tiny piece of office paper under them (about 1cm square) and had hard time closing the SIM holder. I hope it will stay working for a while. If there are no more updates, consider it a working fix.

My symptoms were a bunch of "McSAAB" errors in dmesg and insert-sim icon.
 

The Following User Says Thank You to Mordae For This Useful Post:
Mordae is offline Mordae
2011-03-22 , 21:12
Posts: 2 | Thanked: 1 time | Joined on Mar 2011
#42
OK, so it did not work. It made the problem manifest itself a bit less, but it's still not fixed.
 
tlex26 is offline tlex26
2011-03-24 , 06:40
Posts: 46 | Thanked: 15 times | Joined on Jan 2010 @ Netherlands
#43
Sounds all so familiar.

Since there wasn't anything left for me to try out I had it picked up by my insurance company.

I'm now N900-less :-(
 
ndi's Avatar
ndi is offline ndi
2011-03-26 , 13:09
Posts: 2,050 | Thanked: 1,425 times | Joined on Dec 2009 @ Bucharest
#44
Originally Posted by Mordae View Post
OK, so it did not work. It made the problem manifest itself a bit less, but it's still not fixed.
There's the option of getting a new SIM. Could help.
__________________
N900 dead and Nokia no longer replaces them. Thanks for all the fish.

Keep the forums clean: use "Thanks" button instead of the thank you post.
 
egyptooo is offline egyptooo
2013-10-03 , 02:35
Posts: 1 | Thanked: 0 times | Joined on Oct 2013 @ Egypt
#45
Originally Posted by Andre Klapper View Post
Please provide the SIM status by opening the X Terminal and entering:

dbus-send --system --print-reply --dest=com.nokia.phone.SIM /com/nokia/phone/SIM Phone.Sim.get_sim_status

And please provide the Network registration status by opening the X Terminal and entering:

dbus-send --system --print-reply --dest=com.nokia.phone.net /com/nokia/phone/net Phone.Net.get_registration_status


i am facing the same problem .... wn i wrote these commands in Xterminal .. it gave me he same result for both commands which is "Error org.freedesktop.DBus.error.serviceUnknown: the ame com.nokia.net (or . SIM) wasnt provided by any .service files "
Plz help me ,, i tried to put paper behind the Sim card ,it worked for few days then it stoped working no matter the amount of papers added,tighten the battery pins and flashed the mobile.
Someone told me it cld b the SIM IC ,which is hard to get.
Last edited by egyptooo; 2013-10-03 at 02:42.
 
krutznikov is offline krutznikov
2013-10-03 , 12:44
Posts: 57 | Thanked: 42 times | Joined on Mar 2011 @ France
#46
Originally Posted by egyptooo View Post
i am facing the same problem .... wn i wrote these commands in Xterminal .. it gave me he same result for both commands which is "Error org.freedesktop.DBus.error.serviceUnknown: the ame com.nokia.net (or . SIM) wasnt provided by any .service files "
Plz help me ,, i tried to put paper behind the Sim card ,it worked for few days then it stoped working no matter the amount of papers added,tighten the battery pins and flashed the mobile.
Someone told me it cld b the SIM IC ,which is hard to get.
I think the solution is complicated, see there http://talk.maemo.org/showpost.php?p...&postcount=209 (you can also read the entire thread, but I think that would be the only true solution)
 
tangent's Avatar
tangent is offline tangent
2013-10-16 , 08:19
Posts: 87 | Thanked: 124 times | Joined on Apr 2012 @ Finland
#47
Originally Posted by Mordae View Post
OK, rising the golden pins under the SIM did the trick for me. I put a tiny piece of office paper under them (about 1cm square) and had hard time closing the SIM holder. I hope it will stay working for a while. If there are no more updates, consider it a working fix.

My symptoms were a bunch of "McSAAB" errors in dmesg and insert-sim icon.
Usually pin raising does the trick. I fixed mine by that too.
__________________

Jolla Phone 16GB (2nd in use).
Jolla Tablet 64GB (repaired).
3D modelling & printing.
CAD/CAM amateur.
Prusa i3 3D printer (Max Micron)
"Smith: Mr. Anderson, welcome back.
We missed you ."
 
nokiabot's Avatar
nokiabot is offline nokiabot
2013-10-16 , 08:39
Posts: 1,974 | Thanked: 1,834 times | Joined on Mar 2013 @ india
#48
also check the battery pins the middle one, scrach them a little to clean them
 
Reply
Page 5 of 5 « First 34 5

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 23:00.

Contact Us - Home - Archive - Top