Page 56 of 105 « First 465455 56 575866 Last »
Reply
Thread Tools
auouymous is offline auouymous
2011-04-15 , 22:11
Posts: 875 | Thanked: 918 times | Joined on Sep 2010
#551
Originally Posted by n9ots View Post
thank you.
lock now works....although when I lock the screen it dims, but will not blank until I tap the power button.
Are you pressing the lock&blank button? Bottom is short press, top is long press. If you are using the dpad center to lock you might need to change it from lock(default) to lock&blank in settings:button modes.
 

The Following User Says Thank You to auouymous For This Useful Post:
heavyt's Avatar
heavyt is offline heavyt
2011-04-16 , 04:51
Posts: 708 | Thanked: 125 times | Joined on Jan 2007 @ Too Close To D.C
#552
Is there a way to select lock and flight mode with one selection in the asui window.
 
auouymous is offline auouymous
2011-04-16 , 09:51
Posts: 875 | Thanked: 918 times | Joined on Sep 2010
#553
Originally Posted by heavyt View Post
Is there a way to select lock and flight mode with one selection in the asui window.
The two buttons aren't close enough together for you? Tap, tap and its in flight mode and locked. You don't have to wait for a button's highlight to go away before tapping another button.
 

The Following User Says Thank You to auouymous For This Useful Post:
heavyt's Avatar
heavyt is offline heavyt
2011-04-16 , 14:14
Posts: 708 | Thanked: 125 times | Joined on Jan 2007 @ Too Close To D.C
#554
Originally Posted by auouymous View Post
The two buttons aren't close enough together for you? Tap, tap and its in flight mode and locked. You don't have to wait for a button's highlight to go away before tapping another button.
Thanks, just was wondering if there was a one step way that I had over looked, two steps will do.
__________________
N810-WiMAX
 
tso's Avatar
tso is offline tso
2011-04-16 , 16:56
Posts: 4,783 | Thanked: 1,253 times | Joined on Aug 2007 @ norway
#555
if your using a N800 then it is one tap and a dpad center press to flight mode and lock
__________________
Be warned, posts are often line of thoughts at highway speeds...
 
maacruz is offline maacruz
2011-04-16 , 23:22
Posts: 1,101 | Thanked: 1,185 times | Joined on Aug 2008 @ Spain
#556
I think we can declare victory on the ICD/battery drain problem
 
maacruz is offline maacruz
2011-04-17 , 10:59
Posts: 1,101 | Thanked: 1,185 times | Joined on Aug 2008 @ Spain
#557
Originally Posted by maacruz View Post
I think we can declare victory on the ICD/battery drain problem
I spoke too soon.
Tonight the battery dropped 24.4% in about 9:15 hours, that's about 2.6%/hour.
It seems there is yet another battery drain cause. I didn't use wifi tonight, so it is probably unrelated to wifi; I'll investigate further. Btw, do you have any idea what can be those DSME unhandled messages about?
ASUI log shows mostly nothing during that period, it only woke up once after locking.
Code:
[2] [104092.971429]  [DBUS] signal: org.freedesktop.Hal.Device.PropertyModified (bme)
[2] [104092.971429]  -> dbus-recv SYSTEM org.freedesktop.Hal.Device.GetPropertyInteger(...)
[2] [104092.971429]  -> dbus-recv SYSTEM org.freedesktop.Hal.Device.GetPropertyInteger(...)
[2] [104092.971429]  -> dbus-send SYSTEM com.qzx.asui.flush_calls()
[2] [104092.993250]  wake from select()
[2] [104092.993250]  [main] tklock=0, tc=1, kc=0, puk=1
[2] [104092.993250]  any X events?
[2] [104092.993250]  any dbus messages?
[2] [104092.993250]  any dsme messages?
[2] [104092.993250]  [DSME] screen dimmed = 1
[2] [104092.993250]  mapped (asui=0, blank=0) -- display (on=1, on_time=2409.282013)
[2] [104092.993250]  select() inf=1 time=0.000000 (0.57580)
[2] [104093.004938]  [DBUS] signal: org.freedesktop.Hal.Device.PropertyModified (bme)
[2] [104093.004938]  -> dbus-recv SYSTEM org.freedesktop.Hal.Device.GetPropertyInteger(...)
[2] [104093.004938]  -> dbus-recv SYSTEM org.freedesktop.Hal.Device.GetPropertyInteger(...)
[2] [104093.004938]  -> dbus-send SYSTEM com.qzx.asui.flush_calls()
[2] [104093.018549]  wake from select()
[2] [104093.018549]  [main] tklock=0, tc=1, kc=1, puk=1
[2] [104093.018549]  any X events?
[2] [104093.018549]  any dbus messages?
[2] [104093.027277]  any dsme messages?
[2] [104093.027277]  [DBUS] signal: com.nokia.mce.signal.tklock_mode_ind
[2] [104093.027277]  [DBUS] signal: com.nokia.mce.signal.tklock_mode_ind (lock)
[2] [104093.027277]  -> dbus-send SESSION org.freedesktop.Notifications.SystemNoteInfoprint(...)
[2] [104093.082086]  [DBUS ERROR] A security policy in place prevents this sender from sending this message to this recipient, see message bus configuration file (rejected message had interface "(unset)" member "(unset)" error name "org.freedesktop.DBus.Error.UnknownMethod" destination ":1.7")
[2] [104093.085291]  [DBUS] method: flush calls
[2] [104093.087183]  [DBUS] method: flush calls
[2] [104093.087183]  [DBUS] callback: bme_get_capacity_callback
[2] [104093.087183]  battery capacity = 80.60%
[2] [104093.087183]  -> dbus-send SYSTEM SIGNAL com.qzx.asui.battery_capacity(...)
[2] [104093.087183]  [DBUS] callback: bme_get_active_callback
[2] [104093.087183]  [DBUS] callback: bme_get_capacity_callback
[2] [104093.087183]  [DBUS] callback: bme_get_active_callback
[2] [104093.087183]  [DSME] screen off
[2] [104093.087183]  [DSME] screen dimmed = 0
[2] [104093.087183]  [DSME] unhandled message of type 0x303 with 0 bytes of data
[2] [104093.087183]  [DSME] unhandled message of type 0x304 with 0 bytes of data
[2] [104093.087183]  mapped (asui=0, blank=0) -- display (on=0, on_time=2409.375946)
[2] [104093.087183]  select() inf=1 time=0.000000 (0.57580)
[2] [104093.171930]  wake from select()
[2] [104093.171930]  [main] tklock=1, tc=1, kc=1, puk=1
[2] [104093.171930]  any X events?
[2] [104093.171930]  any dbus messages?
[2] [104093.171930]      message LOCK BUTTON
[2] [104093.171930]  any dsme messages?
[2] [104093.171930]  mapped (asui=0, blank=0) -- display (on=0, on_time=2409.460693)
[2] [104093.171930]  select() inf=1 time=0.000000 (0.57580)
[2] [119636.668115]  wake from select()
[2] [119636.668115]  [main] tklock=1, tc=1, kc=1, puk=1
[2] [119636.668115]  any X events?
[2] [119636.668115]  any dbus messages?
[2] [119636.668115]  any dsme messages?
[2] [119636.668115]  [DSME] unhandled message of type 0x406 with 23 bytes of data
[2] [119636.668115]  mapped (asui=0, blank=0) -- display (on=0, on_time=17952.956878)
[2] [119636.668115]  select() inf=1 time=0.000000 (0.57580)
[2] [137767.364862]  wake from select()
[2] [137767.364862]  [main] tklock=1, tc=0, kc=0, puk=1
[2] [137767.364862]  any X events?
[2] [137767.364862]  any dbus messages?
[2] [137767.364862]  any dsme messages?
[2] [137767.364862]  [DSME] screen on
[2] [137767.364862]  mapped (asui=0, blank=0) -- display (on=1, on_time=0.000000)
[2] [137767.364862]  select() inf=1 time=0.000000 (0.57580)
[2] [137767.437311]  [DBUS] signal: org.freedesktop.Hal.Device.PropertyModified (bme)
[2] [137767.437311]  -> dbus-recv SYSTEM org.freedesktop.Hal.Device.GetPropertyInteger(...)
[2] [137767.437311]  -> dbus-recv SYSTEM org.freedesktop.Hal.Device.GetPropertyInteger(...)
[2] [137767.437311]  -> dbus-send SYSTEM com.qzx.asui.flush_calls()
[2] [137767.471521]  [DBUS] signal: org.freedesktop.Hal.Device.PropertyModified (bme)
[2] [137767.471521]  -> dbus-recv SYSTEM org.freedesktop.Hal.Device.GetPropertyInteger(...)
[2] [137767.471521]  -> dbus-recv SYSTEM org.freedesktop.Hal.Device.GetPropertyInteger(...)
[2] [137767.471521]  -> dbus-send SYSTEM com.qzx.asui.flush_calls()
[2] [137767.511957]  [DBUS] method: flush calls
[2] [137767.511957]  [DBUS] callback: bme_get_capacity_callback
[2] [137767.511957]  battery capacity = 56.90%
[2] [137767.511957]  -> dbus-send SYSTEM SIGNAL com.qzx.asui.battery_capacity(...)
[2] [137767.511957]  [DBUS] callback: bme_get_active_callback
[2] [137767.541284]  [DBUS] method: flush calls
[2] [137767.541284]  [DBUS] callback: bme_get_capacity_callback
[2] [137767.541284]  [DBUS] callback: bme_get_active_callback
[2] [137767.855005]  [DBUS] signal: com.nokia.mce.signal.tklock_mode_ind
[2] [137767.855005]  [DBUS] signal: com.nokia.mce.signal.tklock_mode_ind (unlock)
[2] [137767.855005]  -> dbus-send SESSION org.freedesktop.Notifications.SystemNoteInfoprint(...)
[2] [137767.885309]  [DBUS ERROR] A security policy in place prevents this sender from sending this message to this recipient, see message bus configuration file (rejected message had interface "(unset)" member "(unset)" error name "org.freedesktop.DBus.Error.UnknownMethod" destination ":1.7")
[2] [137767.887109]  wake from select()
[2] [137767.887109]  [main] tklock=0, tc=0, kc=0, puk=1
[2] [137767.887109]  any X events?
[2] [137767.887109]  any dbus messages?
[2] [137767.887109]      message LOCK BUTTON
[2] [137767.887109]  any dsme messages?
[2] [137767.887109]  mapped (asui=0, blank=0) -- display (on=1, on_time=0.522247)
[2] [137767.887109]  select() inf=1 time=0.000000 (0.57580)
[2] [137768.607202]  wake from select()
[2] [137768.607202]  [main] tklock=0, tc=0, kc=0, puk=1
[2] [137768.607202]  any X events?
[2] [137768.607202]  any dbus messages?
[2] [137768.607202]  any dsme messages?
[2] [137768.607202]  [DSME] unhandled message of type 0x311 with 0 bytes of data
[2] [137768.607202]  mapped (asui=0, blank=0) -- display (on=1, on_time=1.242340)
[2] [137768.607202]  select() inf=1 time=0.000000 (0.57580)
[2] [137770.194360]  [DBUS] signal: org.freedesktop.Hal.Device.PropertyModified (bme)
[2] [137770.194360]  -> dbus-recv SYSTEM org.freedesktop.Hal.Device.GetPropertyInteger(...)
[2] [137770.194360]  -> dbus-recv SYSTEM org.freedesktop.Hal.Device.GetPropertyInteger(...)
[2] [137770.194360]  -> dbus-send SYSTEM com.qzx.asui.flush_calls()
[2] [137770.203119]  [DBUS] signal: org.freedesktop.Hal.Device.Condition
[2] [137770.203119]  [DBUS]         n810 keyboard open/close (blank=0)
[2] [137770.223840]  wake from select()
[2] [137770.223840]  [main] tklock=0, tc=0, kc=0, puk=1
[2] [137770.223840]  any X events?
[2] [137770.223840]  any dbus messages?
[2] [137770.223840]      message WAKEUP
[2] [137770.223840]  any dsme messages?
[2] [137770.223840]  mapped (asui=0, blank=0) -- display (on=1, on_time=2.858978)
[2] [137770.223840]  select() inf=1 time=0.000000 (0.57580)
[2] [137770.227869]  [DBUS] method: flush calls
[2] [137770.227869]  [DBUS] callback: bme_get_capacity_callback
[2] [137770.227869]  [DBUS] callback: bme_get_active_callback
 
auouymous is offline auouymous
2011-04-17 , 14:05
Posts: 875 | Thanked: 918 times | Joined on Sep 2010
#558
Originally Posted by maacruz View Post
It seems there is yet another battery drain cause. I didn't use wifi tonight, so it is probably unrelated to wifi; I'll investigate further. Btw, do you have any idea what can be those DSME unhandled messages about?
From powerlaunch:

#define DSME_IN_SYSTEM_INACTIVITY 0x0303
#define DSME_IN_SAVE_UNSAVED_DATA 0x0304
#define DSME_IN_SYSTEM_ACTIVITY 0x0311

// I've received the string /usr/sbin/ke-recv and /usr/bin/hildon-input-method with this message on shutdown
// these programs crash on shutdown. I think this is a message about that
// the above strings followed by \0 0x01 \0 and then 0x2c or 0x30
#define DSME_IN_PROCESS_UNKNOWN 0x0406

Looks like one of your services may have crashed while the screen was off. Might be the cause of the battery drain.
 

The Following User Says Thank You to auouymous For This Useful Post:
n9ots's Avatar
n9ots is offline n9ots
2011-04-17 , 15:15
Posts: 139 | Thanked: 38 times | Joined on Nov 2007 @ mid gulf coast florida
#559
noticed a quirk earlier.
went to shut down my N800, and on doing so the device showed the charging screen...yet no charger was attached.

was able to power back up and then the shutdown routine worked correctly.
haven't been able to reproduce it.
will the debug bits see events such as this?
 
auouymous is offline auouymous
2011-04-17 , 16:15
Posts: 875 | Thanked: 918 times | Joined on Sep 2010
#560
Originally Posted by n9ots View Post
noticed a quirk earlier.
went to shut down my N800, and on doing so the device showed the charging screen...yet no charger was attached.
Something made your device switch to runlevel 5, ASUI merely detected the change and switched to its minimal UI. I know that if an alarm is about to go off the device won't shutdown and instead goes to runlevel 5. This made alarm testing difficult because I had to set alarms more than 5 minutes out so I could shutdown the device. There isn't anything ASUI can do to get around this.
 

The Following 2 Users Say Thank You to auouymous For This Useful Post:
Reply
Page 56 of 105 « First 465455 56 575866 Last »

Tags
bada blows, bada rox

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 09:02.

Contact Us - Home - Archive - Top