Notices


Reply
Thread Tools
Posts: 481 | Thanked: 190 times | Joined on Feb 2006 @ Salem, OR
#111
I don't know if anyone had the same idea because I didn't read all the posts from this thread.
I think the best way is if in the coordinate fields, when you select download area will get filled in with the top-left / right-bottom coordinates of the screen. if you zoom out to see the whole portland, the fields will be filled with the coordinates of the actual square you see on the screen...
what do you think?

-ioan
 
gnuite's Avatar
Posts: 1,245 | Thanked: 421 times | Joined on Dec 2005
#112
Originally Posted by TiganSan
My Maemo-Mapper still crashes consistently performing the actions described below. Dose anybody else experience this?

1- Going to Maps-Download Area, enter coordinates, select Zoom levels to download, click ok. I get a window that shows me the number of images that will be downloaded, click cancel, and select/deselect zoom levels. Go through changing the zoom levels couple of times and Maemo-Mapper crashes and quits. Hit the "clear" button and it crashes.

2- Try to save a Route to a folder on MMC. In the Save window, Scroll up/down few times and Maemo-Mapper crashes and quits.

Thanks,
Tigan
It doesn't surprise me that these actions still crash since I haven't released a fix in the past two days since you first mentioned them. Your posts are detailed and should provide me with enough to fix the bugs that cause these crashes in the next release of Maemo Mapper.

Thanks.
 
gnuite's Avatar
Posts: 1,245 | Thanked: 421 times | Joined on Dec 2005
#113
Originally Posted by ioan
I don't know if anyone had the same idea because I didn't read all the posts from this thread.
I think the best way is if in the coordinate fields, when you select download area will get filled in with the top-left / right-bottom coordinates of the screen. if you zoom out to see the whole portland, the fields will be filled with the coordinates of the actual square you see on the screen...
what do you think?

-ioan
I've considered this, and it's certainly more intuitive than using the last two center points, but how often do people download a rectangle with the same aspect ratio as the screen?

Still, when the whole "last two center points" hack is thrown out in favor of mouse selection, I'll probably use the coordinates of the screen as the initial defaults.
 
Posts: 17 | Thanked: 0 times | Joined on May 2006
#114
Hi,
I have one problem when using maemo-mapper: I use Royaltek rbt 2010 x-mini-xtreme as GPS receiver. Maemo-mapper can`t connect whith it. After enter MAC and "enable GPS" apears banner "Searching fo GPS receiver" it flashes.
HELP!!
thanks
 
gnuite's Avatar
Posts: 1,245 | Thanked: 421 times | Joined on Dec 2005
#115
Originally Posted by lucaluca2
Hi,
I have one problem when using maemo-mapper: I use Royaltek rbt 2010 x-mini-xtreme as GPS receiver. Maemo-mapper can`t connect whith it. After enter MAC and "enable GPS" apears banner "Searching fo GPS receiver" it flashes.
HELP!!
thanks
Make sure that your GPS receiver is on. Also, your receiver may be listening on a different channel - try 2, 3, or 4. Use "hcitool scan" to make sure that your GPS Receiver's bluetooth is working.
 
Posts: 17 | Thanked: 0 times | Joined on May 2006
#116
Hi,
I Use hcitool scan
Scanning ...
00:02:C7:7D:7CB BlueGPS 7D7CDB

different channel - try 2, 3, 4,5,6,7,8

enable GPS apears banner "Searching fo GPS receiver" it flashes.

Thanks
 
penguinbait's Avatar
Posts: 3,096 | Thanked: 1,525 times | Joined on Jan 2006 @ Michigan, USA
#117
or perhaps it was never posted


Did anyone post a binary of the rfcomm patch? Can someone? Please?

Thanks,
 
Posts: 333 | Thanked: 7 times | Joined on Dec 2005
#118
Does anyone have a deLorme BlueLogger GPS and got it to work. I just finally gave this thing a try. I got the bluetooth plugin and it did connect to the GPS detecting it correctly, but looses connection after a minute...it seems to disconnect my WiFi intermittently also. I tried different channels as suggested. And my web browser now closes for no reason. Maemo mapper just say "Searching for GPS Receiver" but nothing happens. I don't even know how to get maps and stuff but I'll worry about that when I get this thing to work. Anyone?
 
Posts: 182 | Thanked: 3 times | Joined on Mar 2006
#119
Originally Posted by NokNok770
Does anyone have a deLorme BlueLogger GPS and got it to work. I just finally gave this thing a try. I got the bluetooth plugin and it did connect to the GPS detecting it correctly, but looses connection after a minute...it seems to disconnect my WiFi intermittently also. I tried different channels as suggested. And my web browser now closes for no reason. Maemo mapper just say "Searching for GPS Receiver" but nothing happens. I don't even know how to get maps and stuff but I'll worry about that when I get this thing to work. Anyone?
Don't use the Bluetooth Plugin. MaemoMapper is configured to automatically connect the GPS via Bluetooth and the Plugin has been known to cause issues. Try not to use the Plugin for GPS. MaemoMapper will find it automatically if it's on.
 
fpp's Avatar
Posts: 2,853 | Thanked: 968 times | Joined on Nov 2005
#120
Awright, time to recompile the 770's killer app for maemo 2.0 now :-)
 
Reply


 
Forum Jump


All times are GMT. The time now is 22:07.