Active Topics
-
Camera phone competition March 2023 "Endless" (35)
to General by Maemish - 2 days, 12 hrs ago -
TLS 1.2 for N9 is ready (28)
to MeeGo / Harmattan by smartblu9 - 2 days, 13 hrs ago -
Maemo repository (3)
to Community by torsen - 3 days, 5 hrs ago -
Error after installing Leste on sdcard (11)
to Maemo 7 / Leste by Maemish - 4 days, 2 hrs ago -
Introducing ubiboot N9 (multiboot OS loader) (1,393)
to Alternatives by smatkovi - 5 days, 9 hrs ago - more...
|
2011-07-15
, 12:29
|
|
Posts: 35 |
Thanked: 22 times |
Joined on Jul 2010
@ Moscow
|
#12
|
There is page on wiki for reflashing. I think, your device just doesn't have kernel to boot with. So as wiki says:
1. Download flasher.
2. Download firmware image. You may need to enter your IMEI number.
3. Make sure, that battery is fully charged.
4. Hold the u key on the device keyboard and connect the USB cable at the same time. If necessary, hold the u key until Windows (i assume you using Windows) has successfully installed the driver. You should see USB icon on your N900, meaning it's in flashing mode.
5. Now, if your device just doesn't have kernel, then this command should work:
If it doesn't work, then flash entire rootfs partition:
1. Download flasher.
2. Download firmware image. You may need to enter your IMEI number.
3. Make sure, that battery is fully charged.
4. Hold the u key on the device keyboard and connect the USB cable at the same time. If necessary, hold the u key until Windows (i assume you using Windows) has successfully installed the driver. You should see USB icon on your N900, meaning it's in flashing mode.
5. Now, if your device just doesn't have kernel, then this command should work:
Code:
flasher-3.5 -f --flash-only=kernel -R -F <firmware-image>
Code:
flasher-3.5 -f -R -F <firmware-image>
|
|
2011-07-15
, 12:31
|
|
Posts: 31 |
Thanked: 2 times |
Joined on Jul 2011
|
#13
|
Originally Posted by nicholes
no I'm from mumbai.
are you trying to falsh you n900 now??
BTW are you from india and indore city(i know "aamir" from india who had n900)
|
|
2011-07-15
, 12:33
|
|
Posts: 31 |
Thanked: 2 times |
Joined on Jul 2011
|
#14
|
Originally Posted by Silvarum
There is page on wiki for reflashing. I think, your device just doesn't have kernel to boot with. So as wiki says:
1. Download flasher.
2. Download firmware image. You may need to enter your IMEI number.
3. Make sure, that battery is fully charged.
4. Hold the u key on the device keyboard and connect the USB cable at the same time. If necessary, hold the u key until Windows (i assume you using Windows) has successfully installed the driver. You should see USB icon on your N900, meaning it's in flashing mode.
5. Now, if your device just doesn't have kernel, then this command should work:
If it doesn't work, then flash entire rootfs partition:Code:flasher-3.5 -f --flash-only=kernel -R -F <firmware-image>
Code:flasher-3.5 -f -R -F <firmware-image>
alright. Thanks. Im downloading new firmware image i.e PR 1.3
is it fine to flash with that firmware? or do I need to get global release?
|
|
2011-07-15
, 12:46
|
|
Posts: 35 |
Thanked: 22 times |
Joined on Jul 2010
@ Moscow
|
#15
|
Not sure, i always use global, because my country not in that list.
|
|
2011-07-15
, 12:49
|
|
Posts: 31 |
Thanked: 2 times |
Joined on Jul 2011
|
#16
|
Originally Posted by Silvarum
actually, i have PR 1.2 firmware in my cell
Not sure, i always use global, because my country not in that list.
so is it fine to get kernel through different firmware?
|
|
2011-07-15
, 12:52
|
|
Posts: 35 |
Thanked: 22 times |
Joined on Jul 2010
@ Moscow
|
#17
|
Err.. no, i think you need 1.2 firmware then. Kernels may be different in those two.
|
|
2011-07-15
, 13:02
|
|
Posts: 31 |
Thanked: 2 times |
Joined on Jul 2011
|
#18
|
ok.
but there will be no harm if i upgrade the firmware (PR 1.3 ) through this situation (losing the kernel) right?
but there will be no harm if i upgrade the firmware (PR 1.3 ) through this situation (losing the kernel) right?
|
|
2011-07-15
, 15:44
|
|
Posts: 35 |
Thanked: 22 times |
Joined on Jul 2010
@ Moscow
|
#19
|
Right, but then you'll may have to reflash /home partition also, hope you have backup of your data.
|
|
2011-07-15
, 17:01
|
|
Posts: 31 |
Thanked: 2 times |
Joined on Jul 2011
|
#20
|
well i've fixed the problem.
i downloaded PR1.3 firmware and used this command
flasher-3.5 -f --flash-only=kernel -R -F <firmware-image>
and i got my kernel back and camera is working fine too
thanks alot guys
i downloaded PR1.3 firmware and used this command
flasher-3.5 -f --flash-only=kernel -R -F <firmware-image>
and i got my kernel back and camera is working fine too
thanks alot guys
BTW are you from india and indore city(i know "aamir" from india who had n900)
N900 gave me a reason to live in this cruel world
get your smooth live wallpaper today
My YouTube videos