Reply
Thread Tools
Posts: 31 | Thanked: 3 times | Joined on Feb 2010 @ Sønderjylland, Denmark
#21
I am using Lehto's kernel, 900Mhz, 500Mhz DSP.

It runs great, except from graphical artifacts in Bounce. So I might consider clocking down the DSP again.
 
Posts: 122 | Thanked: 46 times | Joined on Mar 2010
#22
Originally Posted by Andy214 View Post
Perhaps you can double-check if it was the battery that gets warm.
you are right Andy it's the battery that gets warmer.
 
Posts: 4 | Thanked: 0 times | Joined on Apr 2010
#23
so where would i get the stuff to get mine to 900 mhz and wil i loose all my stuff and how easy is it ?
 
Posts: 36 | Thanked: 8 times | Joined on Apr 2010
#24
just a question ..u guys think i should overclock my n900? is it worth it?
 
se23's Avatar
Posts: 101 | Thanked: 21 times | Joined on Feb 2010 @ London
#25
Originally Posted by Kesse View Post
I am using Lehto's kernel, 900Mhz, 500Mhz DSP.

It runs great, except from graphical artifacts in Bounce. So I might consider clocking down the DSP again.
im using the same, only did it this afternoon and had 1 crash when i had 3 web pages, drnoksnes, music and bounce open. the battery is warmer but overall im loving how fast everything loads. 1 thing i tested was on 3.5g youtube loaded faster than my mates who is on stock and he was connected to wifi.
 
Posts: 36 | Thanked: 3 times | Joined on Dec 2008
#26
I flashed mine today using first the Lehto's 750Mhz and then the 800Mhz system stable ,and the phone feels snappier ,but one problem i cannot connect to my 3G connection it tries to connect for two seconds afterwards it says fails to connect (both versions) i rebooted the phone and turned it off and on and still the same wifi is fine and everything is ine just the 3G .... any ideas?

SOLVED By:
apt-get install --reinstall mp-fremantle-003-pr
note , i have the ME version.

Last edited by crazy_agent; 2010-04-08 at 22:19.
 
lwa's Avatar
Posts: 57 | Thanked: 26 times | Joined on Feb 2010 @ Melbourne, Australia
#27
Originally Posted by kavekave View Post
just a question ..u guys think i should overclock my n900? is it worth it?
I think it is... I'm running 900mhz 500dsp lehto kernel and the phone runs great. especially the browser with scrolling big pages. and emu/roms work way better. picodrive has no skip or slowdowns in my limited experimenting.

Battery life is good on days I dont use the phone much...maybe better than stock, but heavy usage drains it maybe 20% quicker than stock at a guess?

flashed without using usb with fiasco-flasher. kept all my version info as standard so no need to restore version info or be worried how to auto-update to pr1.2 like some posters.
 
Posts: 169 | Thanked: 41 times | Joined on Apr 2010 @ Portugal
#28
If anyone using 900 Mhz kernel by lehto tries to open an image..and see the autorotate function..it slows down (because of 125 MHz).

Lehto is working on a unvoltageoverclock (i know this is not the right term), so it can run 250 Mhz with less voltagem then this 125 Mhz (so its a good thing!). Then, that slows will disapear (just try to connect it to USB power, the Mhz will increase, and you'll see the autorotate image with no\or less slows).

Just test and see the POOL OC thread.

If i understand last posts....its that..now only avaliable a test 800 Mhz..but i hope it will exist a 900 Mhz too (undervoltageoverclock as i say.. : ) ).

Regards.
 
Posts: 16 | Thanked: 0 times | Joined on Feb 2010
#29
Originally Posted by jakiman View Post
Been running 1Ghz for a few days now via Lehto's kernel.
(Was initially using 125-1000/480. Now I'm running 125-1000/500dsp)

Have done all the usual stuff I do on my phone since:
- Watch at least few hours of xvid avi (up to 45mins in single session)
- Watch youtube videos over wifi via MicroB. (about an hour straight)
- Browse the web over many hours over Wifi and 3G.
- Making and receiving calls. Talking up to 20mins at a time.
- Angry Birds for up to an hour at a time.
- DrNokSnes for about 15minutes at a time.

Not noticing any abnormalities yet. Battery life is normal also.

I did overclock it up to 1.2Ghz via Titan's kernel.
It locked up straight away and had to reboot. lol

I was able to get it running seemingly without issues at 1.1Ghz.
But only tested it for an hour or so before going back to 1Ghz. (safer. lol)
Hey Jakiman, thnx 4 all ur great posts, super usefull! I currently am running the 950mhz kernel with 500 DSP.. no problems at all.. Ive been looking everywhere online for the 1ghz 500 DSP kernel file but i cant seem to find it, and i dont want to use the titan kernel mod..please if you have a 1ghz/500dsp kernel file could you PM me the file or link id be gratefull
 
F2thaK's Avatar
Posts: 4,365 | Thanked: 2,467 times | Joined on Jan 2010 @ Australia Mate
#30
Originally Posted by roryh86 View Post
Hey Jakiman, thnx 4 all ur great posts, super usefull! I currently am running the 950mhz kernel with 500 DSP.. no problems at all.. Ive been looking everywhere online for the 1ghz 500 DSP kernel file but i cant seem to find it, and i dont want to use the titan kernel mod..please if you have a 1ghz/500dsp kernel file could you PM me the file or link id be gratefull
yes ive been searching for the 1ghz also!! please
 
Reply


 
Forum Jump


All times are GMT. The time now is 13:55.