Active Topics

 


Reply
Thread Tools
Ice is offline Ice
2010-01-15 , 13:13
Posts: 17 | Thanked: 6 times | Joined on Jan 2010
#1
Its my first post I love my N900 but I did not find anything on the internet about N900 being registered to a CUCM as a SIP phone so I did it and here is how I did if somebody is interested.

On the CUCM.
1. Add a End-user (or use an LDAP user if CUCM i connected to LDAP)
Use your standard User settings.
2. Add a phone
Device - Phone - +Add New -
Phone Type = Third-party SIP Device (Basic), Next
3. MAC Address* = Any MAC Not used or the N900 MAC Address (Settings/About product)
4. Use your default phone settings.
5. Digest User = Select the Digest user (see above).
6. Add directory number and use your default CUCM settings.
7. Click Save and Apply config.


On the N900
1. Go to setttings - VoIP and IM accounts - New
2. Select SIP
3. Username = phone number@CUCM_IPADDRESS (I used the publishers IP)
4. Password = does not matter just put something
5. Click Advanced settings
6. Username (digest user see above)
7. Outbound proxy = CUCM_IPADDRESS (I used the publishers IP)
8. All other settings default and click Done

For me I use the MAC adress of the N900 and I associate the phone to the user it is just nicer but you dont have to.
Its also strange that the password does not have to be correct but I did that but as I said you dont have to.
 

The Following 6 Users Say Thank You to Ice For This Useful Post:
john_doe252 is offline john_doe252
2010-06-28 , 23:21
Posts: 12 | Thanked: 1 time | Joined on Jun 2010
#2
Great post...

You have saved a lot of my time... I'm grateful...

Regards,
 
mrojas's Avatar
mrojas is offline mrojas
2010-06-28 , 23:41
Posts: 733 | Thanked: 991 times | Joined on Dec 2008
#3
I have a N800 registered in our CUCM and if you use a Third-Party Sip Phone Advanced, video calls will get through between the N800 camera and a Cisco VT Advantage.
__________________
Hola! Soy un Guía de Maemo!.

Vínculos interesantes si nos visitas por primera vez (en inglés): New members say hello , New users start here, Community subforum, Beginners' wiki page, Maemo5 101, Frequently Asked Questions (FAQ)

Si te puedo ayudar con cualquier otra cosa, sólo dilo!
 
Ice is offline Ice
2010-06-29 , 06:48
Posts: 17 | Thanked: 6 times | Joined on Jan 2010
#4
mrojas that is just to cool to be true I will do some tests for the N900 but what software do you use for the video call ? (I dont know the N800)
 
newskies is offline newskies
2010-08-09 , 14:28
Posts: 1 | Thanked: 0 times | Joined on Aug 2010
#5
I've done everything that you mention yet the phone will not connect. I select sign in, it tries and then nothing.

N900
Address: <ext>@<call manager ip>
Password: <random>

Advanced:

Use for telephone numbers: <unchecked>
Username: <call manager end user name>
Transport: Auto
Outbound Proxy: <call manager ip>
Port: 5060
Discover Public Address: <ticked>
Loose Routing: <blank>
Keep Alive mech: <auto>
Keep Alive period: <auto>
Auto-detect STUN: <ticked>

CUCM 7.1.2

End user already was present - reused

*other call manager settings as standard, but I did select media termination point*

The phone does not register whatsoever.

Any ideas what I am missing?
 
iproute is offline iproute
2011-02-09 , 15:03
Posts: 10 | Thanked: 3 times | Joined on Feb 2011
#6
I am able to setup the phone as per the provided instructions in CUCM 8.03 and it registers fine.
However I ran into a problem - outgoing calls work but incoming calls to the n900 don't. The phone rings but when you answer it immediately hangs up.
I have tried setting up the phone as basic and as advanced third party sip phone in the call manager and changing the transport to UDP to no avail.
Any help would be appreciated. My e61i and e71 were able to do this just fine so I know it is not the cisco infrastructure - it is a problem with the phone.
 
enginius is offline enginius
2011-06-01 , 04:16
Posts: 1 | Thanked: 0 times | Joined on Jun 2011
#7
Originally Posted by Ice View Post
Its my first post I love my N900 but I did not find anything on the internet about N900 being registered to a CUCM as a SIP phone so I did it and here is how I did if somebody is interested.

On the CUCM.
1. Add a End-user (or use an LDAP user if CUCM i connected to LDAP)
Use your standard User settings.
2. Add a phone
Device - Phone - +Add New -
Phone Type = Third-party SIP Device (Basic), Next
3. MAC Address* = Any MAC Not used or the N900 MAC Address (Settings/About product)
4. Use your default phone settings.
5. Digest User = Select the Digest user (see above).
6. Add directory number and use your default CUCM settings.
7. Click Save and Apply config.


On the N900
1. Go to setttings - VoIP and IM accounts - New
2. Select SIP
3. Username = phone number@CUCM_IPADDRESS (I used the publishers IP)
4. Password = does not matter just put something
5. Click Advanced settings
6. Username (digest user see above)
7. Outbound proxy = CUCM_IPADDRESS (I used the publishers IP)
8. All other settings default and click Done

For me I use the MAC adress of the N900 and I associate the phone to the user it is just nicer but you dont have to.
Its also strange that the password does not have to be correct but I did that but as I said you dont have to.


I have tried to register N900 with CUCM 7.1 but nothing happen. The client is not signed in. DO I need to something on Aruba Controller?
 
Reply

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 12:57.

Contact Us - Home - Archive - Top