My N9 cannot Flash And Could not Started ........when it boot up freeze with nokia logo then turn off.............and try to vanila flash with all command that are avaliable............but when i flashed zimage moslo and zImage_2.6.32.54-ubiboot-02_301013..........boot up with usb cable it shows some green letter...............and my pc found a 14.7 GB removable drive ...............how can i fix it

flasher -F mail.bin -F emmc.bin --erase-user-data=secure --erase-mmc=secure --no-preserve -f -R

1st flash told that


Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Warning: user data may reside on MMC. In that case the MMC is unnecessarily erased twice.
Charging battery, 10 % battery level (11 % required). Ctrl-c to exit
Battery level 11 %, continuing.
Erasing, this may take a while.
ERROR: SU_BEGIN_ERASE_REQ terminated with error code 1: Unknown error
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
ioctl(BLKSECDISCARD) failed for /tmp/sudmmc2WMQf8/internal0: Input/output error
========================================
ERROR: Failed to erase MMC using 'secure' method

And 2nd trying told that


Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Warning: user data may reside on MMC. In that case the MMC is unnecessarily erased twice.

Battery level 11 %, continuing.
Erasing, this may take a while.
Erase done.

Battery level 11 %, continuing.
Erasing, this may take a while.
Erase done.
Image SW version DFL61_HARMATTAN_40.2012.21-3.239.4.4_PR_239
Image moslo not present
Image tar skipped
Image config skipped

Battery level 11 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[_] cmt-mcusw [writing 57 % 6050 / 6050 kB 3574 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1856 kB/s]
[_] rootfs [init 0 % 32768 / 1170174 kB NA ]
[ ] mmc [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3239 kB/s]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 1856 kB/s]
[f] rootfs [init 0 % 32768 / 1170174 kB NA ]
[-] mmc [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not exec 'tune2fs -L rootfs /tmp/sudmmcCCAykW/internal0p2'
mmc: Could not remove mount directory /tmp/sudmmcCCAykW/mnt: No such file or directory
[Pipe 5] Finishing in error state with status 1
========================================

Hi.
I bet you are executing the commands as an unprivileged user: try appending sudo at the beginning of the command. (i.e: execute the flash command as root)

Regards.