Active Topics
-
Error after installing Leste on sdcard (18)
to Maemo 7 / Leste by Maemish - 12 hrs, 57 mins ago -
Maemo 20th Anniversary (4)
to Brainstorm by teroyk - 2 days, 7 hrs ago -
Nokia Booklet 3G (RX-75) Drivers (64)
to Alternatives by teroyk - 2 days, 8 hrs ago -
Porting apps to Leste (46)
to Maemo 7 / Leste by teroyk - 4 days, 11 hrs ago - more...
lucas777 |
2010-04-13
, 15:06
|
|
Posts: 738 |
Thanked: 179 times |
Joined on Mar 2010
@ Gold Coast, Australia
|
#21
|
you may have to flash it a few times though some people said it doesnt flash it all one go, but try it one time check if it worked then if not do it again
 |
|
2010-04-13
, 15:06
|
|
Posts: 2,473 |
Thanked: 12,265 times |
Joined on Oct 2009
@ Jerusalem, PS/IL
|
#22
|
No mention of:?
If not backup MyDocs and reflash the eMMC
Edit: You have to flash the fiasco image again, then the eMMC
Remove the -R option when flashing the FIASCO image.
http://wiki.maemo.org/Updating_the_f...MC_in_the_N900
/dev/mmcblk0p2 2064208 1821236 138116 93% /home
/dev/mmcblk0p1 28312128 24263168 4048960 86% /home/user/MyDocs
/dev/mmcblk1p1 10427408 64 10427344 0% /media/mmc1
Edit: You have to flash the fiasco image again, then the eMMC
Remove the -R option when flashing the FIASCO image.
http://wiki.maemo.org/Updating_the_f...MC_in_the_N900
|
|
2010-04-13
, 15:08
|
|
Posts: 46 |
Thanked: 2 times |
Joined on Jan 2010
|
#23
|
ok, it says never boot the device before installing the emmc, yet you have to do the firmware first, which aito reboots anyway. Is it safe to flash the emms after its' rebooted?
|
|
2010-04-13
, 15:09
|
|
Posts: 2,473 |
Thanked: 12,265 times |
Joined on Oct 2009
@ Jerusalem, PS/IL
|
#24
|
Originally Posted by charlieboy
No, read the wiki again.
ok, it says never boot the device before installing the emmc, yet you have to do the firmware first, which aito reboots anyway. Is it safe to flash the emms after its' rebooted?
"Flash the FIASCO/rootfs image first using the above commands, WTIHOUT the -R at the end of the command. "
DO NOT add -R when reflashing the fiasco image.
Code:
flasher-3.5.exe -F filename.bin -f flasher-3.5.exe -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R
|
|
2010-04-13
, 15:15
|
|
Posts: 46 |
Thanked: 2 times |
Joined on Jan 2010
|
#25
|
Ok, tried omitting the -R, but it did nothing
|
|
2010-04-13
, 15:20
|
|
Posts: 46 |
Thanked: 2 times |
Joined on Jan 2010
|
#26
|
Tried the vanilla with the above command. It says error code 1 and back to pro mpt the N900 hangs
|
|
2010-04-13
, 15:21
|
|
Posts: 2,473 |
Thanked: 12,265 times |
Joined on Oct 2009
@ Jerusalem, PS/IL
|
#27
|
Originally Posted by charlieboy
It will flash without rebooting, you then have to reflash the eMMC :/
Ok, tried omitting the -R, but it did nothing
|
|
2010-04-13
, 15:25
|
|
Posts: 46 |
Thanked: 2 times |
Joined on Jan 2010
|
#28
|
Ok. This what I have done. Flashed the device with latest firmware (UK). Success (Omitted the -R)
I then entered the flasher-3.5.exe -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R
And the system asked for USB connection, then went through code, the N900 showed the 4 white dots, cycled through them and hung.
The terminal in XP showed error 1 code.
Am I doing it correct?
I then entered the flasher-3.5.exe -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R
And the system asked for USB connection, then went through code, the N900 showed the 4 white dots, cycled through them and hung.
The terminal in XP showed error 1 code.
Am I doing it correct?
|
|
2010-04-13
, 15:27
|
|
Posts: 46 |
Thanked: 2 times |
Joined on Jan 2010
|
#29
|
It then find the USB, then boots the device in flash mode
and then:-
SU_GET_UPDATE_STATUS_REQ terminated with error code 1
the N900 hangs on the white dots
and then:-
SU_GET_UPDATE_STATUS_REQ terminated with error code 1
the N900 hangs on the white dots
|
|
2010-04-13
, 15:44
|
|
Posts: 46 |
Thanked: 2 times |
Joined on Jan 2010
|
#30
|
Done it both a success.
But Still 70 MB memeory
But Still 70 MB memeory