Notices

After many searches I have been unable to get my SIP working for outbound calls, It does work though for inbound.

These are the settings they gave me:
These are the SIP settings for your FreePhoneLine account.

Customer Number: 89123
(please note that this is for your reference only and is not for device purposes)

SIP Username: 14165551212

SIP Password: 11A1Aabc

Inbound/Outbound Proxy: voip.freephoneline.ca

Registration Expires: 180 to 3600

Use Preferred Codec: G729a

Use Preferred Codec Only: No

RTP Packet Size: 0.020

Ring Tone Frequency: 52

Ring Tone Voltage: 90

Recommended Dial String: (911|[2-9]xxxxxxxxx|1xxxxxxxxxx|011xxxxxxxxxxxx.|98*|[6-7]x*xxxxxxxxxxx.)
(please note that this is a Linksys dial string we use for our devices and may not work with third party, non-Linksys/Sipura devices)

Anyways I changed user and password, I think it has something to do with the dial plan. Can anyone shed some light on a fix for this, thank You.

Philippe, Toronto, Canada

Can you get it working on a different device than the N900?

Yeah, it does work with a regular ATA Router, I did set it up with Fring, and I am able to make outgoing calls, but unable to use the n900 directly to make outgoing calls, meaning setting up SIP. I am only able to receive calls, but not place them.

What did you put in the fields in the SIP account on the N900?

Hey Gerald..

under address I put in 14165551212@voip.freephoneline.ca
Password, the password that was given to me 11A1Aabc

Enabled (checked)
Under advanced settings

User name is 14165551212
Transport: Auto

Outbound Proxy: voip.freephoneline.ca
Port 5060

Discover Public Address (checked)

Loose Routing (unchecked) but I have tried both to no avail

Keep Alive mechanism: Auto
Keep Alive Period: Auto

Auto detect Stun (Checked)

Keep in mind I changed the username and password, but you see the format, if you see first msg, you can see the settings page they provided me to get this thing to work.. Thanks

Have you tried it without the outbound proxy? And without the username (one that that is just the phone number)? And without both?

I have, just tried it again, deleted entry and just added user name and password, still can not make the call, but I am able to receive a call.

I was wondering maybe if there is a way to enter the dial string.

so basically leaving all the advanced stuff to default and just entering username and pass I am able o receive a call, but I can not make an outgoing call.

Thanks

Without a dial plan you should still be able to make calls. When you make a call from the N900 what happens? Do you have the paid service or the free one? Is the N900 behind a different firewall than the ATA router you used? Can you call voice mail (*98) from the N900?

I will run out ideas soon.

I can not call voicemail, tried *98, ring, then says Phone disconnected.
the n900 is behind a firewall and opend all the ports but still does not work.
Tried calling another number that I have to see if it will even ring but it does not. Even though I hear the phone ringing(from the n900),while it is ringing, the other phone that I dialed does not even ring, not once), the other phone just does not ring. I am able to dial from the other phone into the 900 with no probs.

Time to ask freephoneline.ca or try their forums. Sorry I could not help.